Features
Power Options
The G10 PSTN gateway can operate from an 802.3af PoE LAN, or from the supplied 12V DC/1A wall adapter. The adapter connects the G10 PSTN gateway to a power source.
External Paging Jack If required, the G10 PSTN gateway has an External Paging 3.5 mm mini-jack that you can connect to a customer-supplied audio amplifier with speaker for making announcements. The output is monophonic (single-channel). The External Paging jack provides a maximum output of 1 Vrms across an impedance of 47.0 kohms. The output impedance is 600 ohms.
Music on Hold Jack The G10 PSTN gateway has a Music on Hold audio input mini-jack to support the one-X Quick Edition system’s music-on-hold feature. The jack accommodates standard 3.5 mm connectors. The Music on Hold jack supports a maximum input level of 2 Vrms across an input impedance of 47.0 kohms.
FXO Ports (L4, L3, L2, L1) The four FXO ports (L4, L3, L2, L1) on the G10 PSTN gateway are designed to receive analog telecommunications lines from a Central Office (CO) of the PSTN. These lines, also known as trunks, are called PSTN lines. Your service provider delivers one or more PSTN lines to your place of business through telephone jacks on the wall, or a patch panel in a telephone closet.
LAN Port The G10 PSTN gateway has one 10/100 Base-T Ethernet connector: an RJ45 LAN port. Using a customer-supplied Cat5 (or better) Ethernet cable, you can connect the LAN port to an unused port on an IP router or switch that is connected to your Ethernet LAN.

|